47"x1/2" Stainless Steel Strap

The easy-to-install Universal Adjustable Sign Clamp is used to mount signs to large posts or poles. It is a quick-release worm drive clamp that conveniently fits square and round sized poles from 4” to 12” in diameter.

No expensive tools or rolls of strapping are required for install. The stainless steel strap and zinc-plated screws are corrosion resistant and can be reused.

The strap can be paired with various hardware: straight and flared leg brackets, and standard or tamper-resistant fasteners. Each installation kit comes with two stainless steel bands, two flared leg brackets, and two bolts with washers.

Installation

Tools needed:
1/2 socket for front bolt
5/16 socket for adjuster bolt

Feed the metal strap through both slots of the bracket
Place the thick bolt and washer through the front of the bracket; finger tighten
To create a loop around your desired object, feed the strap through the mouth at the end of the strap where the slim screw is
To adjust, make sure the slim screw is pointing straight away from the strap, then push or pull the strap according to desired tightness
To secure, push screw flat to strap
Tighten with 5/16 inch socket
Note: you will feel screw bite into strap and pull it tight as you turn
the screw